# 
# LeEco X3-55pro (Super3 x55 Pro) packer configuration file
# The TV is based on mst6a928 cpu
# 

[Main]

# Output file name
FirmwareFileName=LetvUpgrade928.bin

# Folder which contains images to pack
ProjectFolder=./pack

# Use hex values in "mmc write.p" directive. 
# Check your unpacked ~header_script file for the "mmc write.p" paramers.
# Set it to True, if the paramers have "0x" prefix.
# All newest Mstar firwares uses hex values
useHexValuesPrefix=false

# Firmware file name to use in "filepartload" directive. 
# All newest Mstar firwares uses $(UpgradeImage) Otherwise it should be equal FirmwareFileName value.
SCRIPT_FIRMWARE_FILE_NAME=${FirmwareFileName}

# DRAM_BUF_ADDR value
DRAM_BUF_ADDR=20200000

# Magic footer value. It's reserved for future use, usually it's "12345678" string
MAGIC_FOOTER=12345678

# Header size is always 16KB
HEADER_SIZE=16KB

[HeaderScript]

# Custom header script directives at the beginning of the script
Prefix:
	mmc slc 0 1
	mmc rmgpt
	factory_init factory 0x02000000	

# Custom directives at the end of the script
Suffix:
	cleanallenv
	setenv filesize 6748c0
	setenv LOAD_KERNEL mmc read.p 0x25000000 boot 0x01000000\; authenticateAN 0x25000000
	setenv filesize 6748c0
	setenv BOOT_KERNEL bootm 0x25000000
	setenv recoverycmd mmc read.p 0x25000000 recovery 0x02000000\; authenticateAN 0x25000000\; bootm 0x25000000
	setenv LOAD_NUTTX mmc read.p 0x5EC70000 tee 0x600000
	setenv BOOT_NUTTX bootNuttx 0x1EC70000
	setenv CMA_REG0 CMA0=mali0,miu=0,hid=16,sz=0x1F000000
	setenv CMA_REG1 CMA1=mali1,miu=1,hid=17,sz=0x5400000
	setenv CMA_REG2 CMA2=VDEC1,miu=1,hid=19,sz=0xCC00000,st=0x6C00000
	setenv bootargs console=ttyS0,115200 androidboot.console=ttyS0 root=/dev/ram rw rootwait init=/init CORE_DUMP_PATH=/data/Logs/Log.0/core_dump.%%p.gz KDebug=1 delaylogo=True androidboot.selinux=permissive $(CMA_REG0) $(CMA_REG1) $(CMA_REG2) PM51_ADDR=0x20010000 PM51_LEN=0x10000 DRAM_LEN=0xC0000000 BOOTLOGO_IN_MBOOT ENV_VAR_OFFSET=0x0 ENV_VAR_SIZE=0x10000 ENV=EMMC SECURITY=ON
	setenv bootlogo_gopidx 3
	setenv bootlogo_buffer E_MMAP_ID_PHOTO_INTER
	setenv str_crc 1
	setenv db_table 0
	setenv verify n
	setenv bootcmd $(LOAD_KERNEL)\; $(LOAD_NUTTX)\; $(BOOT_NUTTX)\; $(BOOT_KERNEL)
	setenv ForcePowerOn 1
	setenv factory_poweron_mode secondary
	setenv sync_mmap 1
	setenv detect_mmap 1
	saveenv
	setenv LetvUpgrade_complete 1
	setenv factory_mode 0
	setenv ResetAfterUpgrade 1
	setenv ForcePowerOn 1
	setenv db_table 0
	saveenv
	printenv

# List of partitions to pack
#	[partition_name] - Name of partition. Shold begin with "part/"
#	create - flag to generate "mmc create" directive. It requires "size" parameter
#	size - Required parameter, if create flag sets to True. Partition size to create [hex]
#	erase - flag to generate "mmc erase.p" directive.
#	imageFile - Path to image file to pack
#	type - partition type:
#		partitionImage - Plain partition image. It generates "filepartload" and "mmc write.p" directives
#	 	secureInfo - signature file. Uses "store_secure_info" directive
#	 	nuttxConfig - Nuttx config file. Uses "store_nuttx_config" directive
#	lzo - pack partition/chunk to lzo. Uses "mmc unlzo" directive
#	chunkSize - chunk size to split partition. A single chunk uses, if chunkSize is not set. Units: B, KB, MB, GB

[part/MPOOL]
# Signatures (secureInfo) stored in that partition, so it should be erased before writing secure info.
# We erase it very first
erase=True

[part/ipanic]
create=True
size=0x00200000

[part/misc]
create=True
size=0x00080000
erase=True

[part/reserved]
create=True
size=0x02000000

[part/recovery]
create=True
size=0x02000000
erase=True
imageFile=${Main:ProjectFolder}/recovery.img
type=partitionImage

[part/recoverySign]
imageFile=${Main:ProjectFolder}/recoverySign
type=secureInfo

[part/boot]
create=True
size=0x01000000
erase=True
imageFile=${Main:ProjectFolder}/boot.img
type=partitionImage

[part/bootSign]
imageFile=${Main:ProjectFolder}/bootSign
type=secureInfo

[part/tee]
create=True
size=0x01000000
erase=True
imageFile=${Main:ProjectFolder}/tee.img
type=partitionImage

[part/teeSign]
imageFile=${Main:ProjectFolder}/teeSign
type=secureInfo

[part/NuttxConfig]
imageFile=${Main:ProjectFolder}/NuttxConfig
type=nuttxConfig

[part/RTPM]
create=True
size=0x00040000
erase=True
imageFile=pack/RTPM.img
type=partitionImage

[part/system]
create=True
size=0x60000000
erase=True
imageFile=${Main:ProjectFolder}/system.img
type=partitionImage
lzo=True
chunkSize=150MB

[part/cache]
create=True
size=0x60000000
erase=True
imageFile=${Main:ProjectFolder}/cache.img
type=partitionImage
lzo=True

[part/tvservice]
create=True
size=0x09600000
erase=True
imageFile=${Main:ProjectFolder}/tvservice.img
type=partitionImage

[part/tvconfig]
create=True
size=0x06400000
erase=True
imageFile=${Main:ProjectFolder}/tvconfig.img
type=partitionImage

[part/tvdatabase]
create=True
size=0x02000000
erase=True
imageFile=${Main:ProjectFolder}/tvdatabase.img
type=partitionImage

[part/tvcustomer]
create=True
size=0x01000000
erase=True
imageFile=${Main:ProjectFolder}/tvcustomer.img
type=partitionImage

[part/userdata]
create=True
size=0x320D3F000 variable:0x1000000,0x64D93E000,0x2A9B3F000,0xD7C3F800
erase=True
imageFile=${Main:ProjectFolder}/userdata.img
type=partitionImage
lzo=True
chunkSize=150MB

[part/sboot]
imageFile=${Main:ProjectFolder}/sboot.img
type=sboot

[part/MBOOT]
imageFile=${Main:ProjectFolder}/MBOOT.img
type=partitionImage